Evergreen Lawndale Spray Foam InsulationEvergreen Lawndale Spray Foam Insulation

Wall insulation in Lawndale CA - rooms that hold their temperature and keep noise out

Hot rooms, drafty outlets or street noise coming through the walls? We fill the empty wall spaces and seal the holes we drill.

Wall framing filled with pale spray foam insulation, with an exposed silver duct and a window at right.
  • Fully licensed and insured.
  • Free estimates at your property.
  • We respond within 1 business day.

What does wall insulation involve for a Lawndale house?

Wall insulation in Lawndale, CA puts batts, blown-in fiberglass or cellulose, or spray foam into the empty spaces inside your walls, so rooms hold their temperature better and less outside noise gets through.

At Evergreen Lawndale Spray Foam Insulation, wall calls usually start with a room over the garage that cooks in the afternoon or an outside wall you can hear the street through, and those walls often turn out to have little or nothing in them. The price moves with how much wall there is, which method fits, from batts to blown-in insulation, how we get into the spaces and what your siding is, because filling finished walls from outside is a different job from filling open walls during a remodel. The schedule mostly turns on whether something has to be fixed first, like damp or old wiring, and on the permit check. I put all of it in a written estimate that lists each step in order, so you see the plan and the price before anything gets drilled.

How do you know your walls need insulation?

  • One room never feels right

    A bedroom over the garage or a corner room that's hot all afternoon and chilly at night usually has thin or empty walls. Until that's fixed, the AC and heater keep fighting it and the power bill shows it.

  • Drafts at outlets and trim

    If you feel air at outlet covers or baseboards on outside walls, there are gaps and empty spaces behind them letting air through. Insulation alone won't stop that, so it pays to seal those gaps before anything gets filled.

  • Street noise in the bedroom

    Traffic, neighbors and leaf blowers that sound like they're in the room usually mean hollow walls carrying the sound straight in. Filling those spaces dulls the noise as well as holding the temperature.

How we handle wall insulation, step by step

Walls come down to how they're built and how we get in, so I start by looking at your siding and the wall spaces behind it before choosing batts, blown-in or foam. If there's damp, old wiring or anything that looks unsafe, we stop and deal with that first, because covering it up only hides the problem. We protect the rooms and floors near the work, seal the gaps that let air through, then fill. When the walls are closed and we fill from outside, we drill into each empty space, fill it, and plug and seal the holes we drill before the siding goes back, then clean up so you're not finding dust for a week.

Walls are rarely the only place air gets in. Gaps where pipes, wires and the attic hatch pass through let air slip around new insulation, so we often pair this with air sealing services along the top and bottom of the walls. If part of your house sits below ground, basement insulation is its own job with its own materials, and I'll tell you if those walls need it.

  • Batts for open walls

    Batts, which are blanket rolls, fit best when the walls are open during a remodel and the framing spaces are an even size, and that's where they're a very cost-effective choice. We cut them to sit snug around wiring and boxes without squashing them, since squashed insulation leaves thin spots.

  • Blown-in for finished walls

    Blown-in is loose fiberglass or cellulose sent through a hose, and it suits closed walls and odd-shaped or hard-to-reach spaces a batt can't fill. It's how most finished walls get insulated without tearing out the drywall.

  • Spray foam where drafts matter

    Foam costs more than the other two, but it seals air while it insulates, so it earns its price in open walls where stopping drafts is the main goal. For most finished walls, I'd rather seal the gaps we can reach and blow in, because you get most of the benefit for less.

Get a written wall insulation estimate for your house

Send the form and we'll get back to you within one business day to set a time. I come out, look at your walls and measure, and the estimate is free with no pressure to book.

(424) 528-1317
Based in
Lawndale, CA 90260
Hours
Mon–Fri: 7 AM–9 PM, Sat–Sun: 6 AM–9 PM

What happens after you call about wall insulation in Lawndale?

Here's how it runs from your first call to the finished walls, so you know who you'll deal with and what you'll have in hand before you decide.

  1. Call or send the form

    Tell us which rooms bother you, your siding type and a rough idea of the wall area if you have it. We call back to set a time for me to come out.

  2. I look at your walls

    I come out myself, check the siding and the wall spaces, and measure. I also note anything that has to be dealt with first, like old wiring, damp spots or insulation that looks like vermiculite.

  3. Read your written estimate

    You get a written estimate that names the method for your walls and lists each step in the order we'll do it, so you know what you're paying for before you say yes. If something has to be fixed first, it's on there too, not sprung on you halfway through.

  4. We do the work together

    If you go ahead, we sort out any permit and our crew does the install. When we're done, I walk through the finished job with you, wall by wall.

Why Lawndale homeowners call Evergreen Lawndale Spray Foam Insulation for their walls

  • The person who quotes stays on site

    I come out to look and measure, and when our crew does the install, I'm on site with them. The person who saw your siding and wall spaces is the one deciding where each hole goes.

  • Back in the trade since 2023

    I learned this work crawling attics and crawl spaces, spent a long stretch doing other work, then came back and started this business in 2023. Coming back meant reading the current guidance closely instead of leaning on old habits.

  • Licensed and insured in California

    California's contractor board treats insulation as its own trade, covering insulation installed for temperature or sound control. We're fully licensed and insured, and we stand behind it with satisfaction guaranteed on every job.

  • Your Lawndale climate zone, checked

    California's Energy Code sorts the state into climate zones, and what it expects of a home's outer shell depends on the zone your house sits in. Ask me which zone covers your Lawndale home and I'll tell you before we start.

On walls, the order of the work matters most, so damp and wiring get handled before anything goes in. Call (424) 528-1317 or send us the form with your siding type and a rough wall area, and we'll set up a visit.

Wall insulation, permits and older houses in Lawndale

Lawndale's Building & Safety Department is the office that answers permit questions for the city. Whether your wall job needs a permit isn't something I'll guess at, so before work starts we check with the city or county office that covers your address, and when a permit is needed we take care of the paperwork and the inspection. We're based in Lawndale and work across the South Bay and the cities around it, so that check happens whichever office covers your house.

A lot of the houses we get into around here are older homes with stucco or wood siding and walls built with little or nothing in them. Stucco doesn't come off like vinyl, so how we get into those walls gets worked out on the visit, and we see the same kinds of houses on jobs in Torrance and Hawthorne.

Questions about wall insulation in Lawndale

How much does wall insulation cost in the Los Angeles area?

Wall insulation in the Los Angeles area usually runs about $1 to $4 per square foot, and that's the going rate across the area, not our price. Where your job lands depends on the method, how much wall there is and how we get into it. Your written estimate gives you the figure for your house.

Can my walls be insulated from outside without opening the drywall?

Yes, walls can be filled from outside by taking off siding where needed and drilling into each empty wall space. Vinyl, aluminum and steel siding can usually be loosened with a siding tool, so your siding type shapes how the outside work goes. Afterward the holes get plugged and sealed, and the water barrier behind the siding is repaired where there is one, to keep water out.

Who do I call about a permit for insulation work in Lawndale?

Lawndale's Building & Safety Department answers permit questions, and you can reach it at (310) 973-3236. The same office handles inspections and plan checks, the city's review of building plans.

How do I keep blown-in insulation in my walls from settling?

The way to keep it from settling is to fill each wall space completely and pack it to enough density, so it doesn't sink and leave holes and voids. Packed that tight, it can also slow air moving inside the wall. That's what we check space by space when we blow in a wall.

Can cellulose be blown into brick or block walls?

Generally no, because a cellulose trade group's guide says it's not recommended for filling the cavities of masonry walls like brick or block, or for walls below ground. If your house has brick or block walls, I'll look at what's actually there before suggesting another way.

What is the best way to stop drafts coming through the walls?

Spray foam gives excellent air sealing, even at hard spots like the rim joist, the wood band where the floor framing meets the wall. It makes sense when stopping air moving through the walls matters as much as the insulation itself. In finished walls, sealing the gaps we can reach and blowing in is often the more practical route, and I'll tell you which fits on the visit.

  • Air sealing services

    Insulation can't stop air that slips through gaps around pipes, wires and the attic hatch, so sealing those first lets the new wall insulation do its job.

  • Basement insulation

    If a lower level sits partly below ground, those walls need materials chosen for damp conditions, and any water has to be fixed before anything covers them.

Service areas for wall insulation in the South Bay

Evergreen Lawndale Spray Foam Insulation is based in Lawndale, CA, and insulates walls across the South Bay and the cities around it. The 12 cities listed here have their own pages, including Gardena and Redondo Beach, and we work in other cities nearby too.

Lawndale, CA

Have us look at your walls

Have your siding type and a rough wall area handy when you call (424) 528-1317 or send the form, so the first conversation gets us further.